Sony HT-ZF9 Uživatelský manuál stáhnout pdf (Strana 63)

63

GB

[Transmitter]: This system is in

transmitter mode, which enables it to

send audio to the BLUETOOTH

compatible headphones. If you switch

the input of the system, “BT TX” appears

on the front panel display.

[Off]: The BLUETOOTH function is turned

off and you cannot select the [Bluetooth

Audio] input.

• When [Bluetooth Mode] is set to [Off]

while [Network/Bluetooth Standby] is set

to [On] (page 63), [Network/Bluetooth

Standby] is set to [Off] automatically.

• When you set [Network/Bluetooth

Standby] (page 63) to [On] while

[Bluetooth Mode] is set to [Off],

[Bluetooth Mode] is set to [Receiver]

automatically.

[Device List]

Displays a list of paired and detected

BLUETOOTH devices (SNK device) when

[Bluetooth Mode] is set to [Transmitter].

[Bluetooth Codec - AAC]

This function is only available when you

set [Bluetooth Mode] to [Receiver].

[On]

: Enables AAC codec.

[Off]: Disables AAC codec.

You can enjoy high-quality sound if AAC is

enabled and your device supports AAC.

[Bluetooth Codec - LDAC]

This function is only available when you

set [Bluetooth Mode] to [Receiver] or

[Transmitter].

[On]

: Enables LDAC codec.

[Off]: Disables LDAC codec.

• You can enjoy more high-quality sound if

LDAC is enabled and your device supports

LDAC.

• When connecting a BLUETOOTH device,

this setting cannot be changed.

[Wireless Playback Quality]

You can set the transmission data rate

of LDAC playback. This function is only

available when you set [Bluetooth

Mode] to [Transmitter] and [Bluetooth

Codec - LDAC] to [On].

[Sound Quality]: The highest bit rate is

used. Sound is sent in a higher quality;

however, audio playback sometimes

may become unstable when the link

quality is not good enough. If audio

playback is unstable in this mode, select

[Auto].

[Auto]

: The data transfer rate is

automatically changed depending on

the environment.

[OSD Language]

You can select the language you want

for the system on-screen display.

[IR-Repeater]

[On]: Remote signals for the TV are sent

from the rear of the main unit.

[Off]

: Turns off the function.

For details, see “When the TV Remote

Control does not Work” (page 33).

[Network/Bluetooth Standby]

[On]: You can turn the system on via the

network or BLUETOOTH function.

[Off]: You can save power in standby

mode. It takes time to output sound

from the subwoofer or rear speakers

after turning the system on.

• If you agree to use the Chromecast built-

in function, [Network/Bluetooth Standby]

automatically switches to [On].

• If you set [RF Channel] to [On] (page 33),

[Network/Bluetooth Standby]

automatically switches to [On].

• When [Bluetooth Mode] is set to [Off]

(page 62) while [Network/Bluetooth

Standby] is set to [On], [Network/

Notes

Note

Notes

[System Settings]

Notes

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 95 96

Komentáře k této Příručce

Žádné komentáře