Sony STR-DA3600ES Uživatelský manuál

E:\STR-DA3600ES_rev\4184698121\4184698121STRDA3600ESCEL\00COV-STRDA3600ESCEL\120BCO.fmmasterpage: LeftSTR-DA3600ES4-184-698-12(1)Printed in Malaysia12

10GBA SWLights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack.B Dolby Pro Logic indicatorsLights up one of the

100GB* Initial setting** When you assign a component video input to the HDMI input via the Input Assign menu, component video signals are not converte

101GBUsing Other FeaturesUsing the sleep timerYou can set the receiver to turn off automatically at a specified time.Press SLEEP repeatedly.Each time

102GBYou can record with an audio component using the receiver. Refer to the operating instructions supplied with your MD deck or tape deck.1 Select “

103GBUsing Other FeaturesSwitching the command mode of the receiver and the remote You can switch the command mode (COMMAND MODE AV 1 or COMMAND MODE

104GB2 Press AMP. The ZONE button goes off, the AMP button keeps flashing and the SHIFT button lights up.3 Press the numeric button 1 or 2 while the A

105GBUsing Other Features4 Select the appropriate speaker pattern so that there are no surround back speakers and no front high speakers.5 Press RETUR

106GBUsing the setting menuYou can adjust the various settings for speakers, surround effects, multi zone, etc., using the setting menu.To display the

107GBAdjusting SettingsAuto CalibrationPerforms auto calibration. For details, see “10: Calibrating the appropriate speaker settings automatically (Au

108GBYou can register 3 patterns as Pos. 1, 2, and 3, depending on the listening position, listening environment, and measurement conditions.To regist

109GBAdjusting SettingsSpeaker settingsYou can adjust each speaker manually. You can also adjust the speaker levels after auto calibration is complete

11GB;D+Dolby Digital Plus;D EXDolby Digital Surround EXNoteWhen playing a Dolby Digital format disc, be sure that you have made digital connections an

110GBTo adjust the distance from the seating position to each speakerYou can adjust the distance from the seating position to each speaker (front left

111GBAdjusting SettingsYou can select the test tone type on the Test Tone screen.Tips• To adjust the level of all speakers at the same time, press MAS

112GBWhen a test tone is output from a different speaker than the speaker displayed on the screenThe speaker pattern to the connected speaker is not s

113GBAdjusting SettingsSurround settingsYou can select the sound field and adjust the effect level, etc., on the Sound Field Select screen.For details

114GBEQ settingsYou can use following parameters to adjust the tonal quality (bass/treble level) of front, center and surround/surround back speakers.

115GBAdjusting Settings1 Select the zone for which you want to adjust the volume, then press .2 Select “Volume,” then press .3 Adjust the volume, th

116GBAudio settingsYou can make settings for the audio to suit your preference.The D.L.L. function is Sony proprietary technology that allows low qual

117GBAdjusting Settingsx AUTOAutomatically switches the input mode between Dolby Digital, DTS, or PCM.Notes• Even when “Decode Priority” is set to “PC

118GBVideo settingsMakes settings for video.Lets you convert the resolution of analog video input signals.x DIRECTLets you output analog video input s

119GBAdjusting SettingsNotes• Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT jacks when the monitor, etc., is

12GBP MEMA memory function, such as Name Input, etc., is activated.Q DTS-HD indicatorsLight up when the receiver is decoding DTS-HD.DTS-HDLights up co

120GBNotes• The sound quality of the playback component depends on the TV’s sound quality, such as the number of channels, and the sampling frequency,

121GBAdjusting SettingsNetwork settingsMakes the settings for the network.Lets you make the network settings.To check the network settings1Select “Net

122GBLet you turn the function which controls the receiver from external controllers on the home network on or off.x OFFx ONNoteIf you set “Controller

123GBAdjusting Settingsx ONThe network function works even when the receiver is in standby mode.In addition, the start-up time of the network function

124GBSystem settingsCustomizes the settings of the receiver.Let you turn the control mode for maintenance and service on or off.x OFFx ONLets you turn

125GBAdjusting SettingsReceiver updating starts.The MULTI CHANNEL DECODING lamp on the front panel flashes while updating.When the updating complete,

126GB4 Press V/v repeatedly to select the menu item, then press .The parameter appears in brackets.5 Press V/v repeatedly to select the parameter you

127GBAdjusting SettingsThe following options are available in each menu. “xx…” in the table signifies the parameter for each item.Menu list (in the di

128GBLevel settings<LEVEL>TEST TONE OFF, FL to RH (AUTO), FL to RH (FIX)OFFP. NOISE(Phase noise)OFF, FL/CNT, CNT/FR, FR/SL, FR/SR, SR/SL, SR/SB

129GBAdjusting SettingsSpeaker settings<SPEAKER>SP PATTERN(Speaker pattern)5/2.1 to 2/0 (20 patterns) 3/4.1FRT SIZE(Front speakers size)LARGE, S

13GBRear panelA DIGITAL INPUT/OUTPUT section (page 24, 28, 34)OPTICAL IN/OUT jacksCOAXIAL IN jacksHDMI IN/OUT* jacks (page 24, 25)B ANTENNA sectionFM

130GBSpeaker settings<SPEAKER>FRT CROSS*(Front speakers crossover frequency) CROSS 40 Hz to CROSS 200 Hz (10 Hz step)CROSS 120 HzCNT CROSS*(Cent

131GBAdjusting SettingsTuner settings<TUNER>FM MODE STEREO, MONO STEREONAME IN(Naming preset stations)For reference on this function, see “Namin

132GBTo change the displayYou can check the sound field, etc., by changing the information on the display.1 Select the input for which you want to che

133GBFor Installation Purposes: Operating Each Component Using an External Control Device (Quick Click)Operating components or lighting connected to t

134GBUsing Quick ClickYou can control components connected to the receiver, a TV, projector, or lighting using an external control device.NoteYou may

135GBFor Installation Purposes: Operating Each Component Using an External Control Device (Quick Click)Setting components that are operated by an exte

136GB2 Select “Quick Click,” then press .3 Select “Macro,” then press .4 Select the macro number for which you want to program the sequence of operat

137GBFor Installation Purposes: Operating Each Component Using an External Control Device (Quick Click)5 Select “Learn Mode,” then press .6 Select the

138GBOperating each component using the multifunction remoteYou can control Sony or non-Sony components you are using with the multifunction remote su

139GBOperating Each Component Using the Multifunction Remotea)LD player onlyb)Deck B onlyc)DVD onlyd)Video CD onlye)USA/Canadian model onlyf)European

14GB* You can watch the selected input image when you connect the HDMI OUT or MONITOR OUT jacks to a TV (page 24).You can use the supplied remote to o

140GB4 Press ENTER.Once the numeric code has been verified, the RM SET UP button flashes twice and the remote automatically exits the programming mode

141GBOperating Each Component Using the Multifunction RemoteTo control a DVD/VCR COMBO (recorder)To control a HDD/DVD COMBO (recorder)To control a TVT

142GBTo control a VCR* If an AIWA VCR does not work even though you enter the code for AIWA, enter the code for Sony instead.To control a satellite tu

143GBOperating Each Component Using the Multifunction RemotePerforming several commands in sequence automatically(Macro Play)The Macro Play function l

144GBTipIf the RM SET UP button flashes five times in step 1, and the macro programming process does not start, replace the batteries with new ones.To

145GBOperating Each Component Using the Multifunction Remote1 Press THEATER while pressing RM SET UP.The RM SET UP button lights up.2 Press the input

146GBClearing all the contents of the remote’s memory1Hold down ?/1 while pressing MASTER VOL –, then press AV ?/1, all at the same time.The RM SET UP

147GBAdditional InformationPrecautionsOn safetyShould any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qua

148GBTroubleshootingIf you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy th

149GBAdditional InformationThere is no sound from digital sources (from COAXIAL or OPTICAL input jack).• Check the INPUT MODE (page 98).• Check that t

15GBH INPUT SELECTORPress to select the input source to play back.I MASTER VOLUME +/– (page 57)J MUTING (page 57)K RETURN/EXIT O (page 54)L DISPLAYPre

150GB• “PLII (Music/Movie),” “PLIIx (Music/Movie),” “PLIIz Height,” and “Neo:6 (Music/Cinema)” do not work when the speaker pattern is set to 2/0 or 2

151GBAdditional InformationRecording cannot be carried out.• Check that the components are connected correctly (page 25).• Select the source component

152GB• If you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure, repeat the procedures of “Preparing for t

153GBAdditional Information– If there is another device between this device and the router, check that device is turned on.– Are all of the cables con

154GBIf there is a malfunction, the display shows a code of two numbers and a message. You can check the status of the system by the message. See the

155GBAdditional InformationSpecificationsAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION:With 8 ohm loads, both channels driven,

156GBAM tuner sectionTuning rangeIntermediate frequency450 kHzAntenna (aerial) Loop antenna (aerial)Video sectionInputs/OutputsVideo: 1 Vp-p, 75 ohmsC

157GBAdditional InformationNotes• Not compatible with DRM protected files.• Depending on the files, there may be files that sometimes cannot be played

158GBGeneralPower requirements 120 V AC, 60 Hz (in USA and Canada)230 V AC, 50/60 Hz (in Europe and general area)Power output (DIGITAL MEDIA PORT)DC O

159GBAdditional InformationIndexSymbolsU SIGNAL GND terminal 37Numerics12V Trigger 1152 channel 722ch Analog Direct 722ch Stereo (mode) 724 ohms

16GBA AV ?/1 (on/standby)Press to turn on or off the audio/video components that the remote is assigned to operate (page 139).If you press ?/1 (2) at

160GBGGUI (Graphical User Interface) 24HHD-D.C.S. 76HD-D.C.S. (effect type) 113HDMI 119HDMI jacks 25IInput 57Input Assign 99INPUT MODE 98iPod

161GBAdditional InformationServerPreparing 52Setting menu 106Settings 106Settings Lock 124Setup Manager 88SHOUTcastFavorite stations 88Listening

162GB

17GBTUNING +/–Press to select station.R PRESET + 2)/–Press to select preset stations.TV CH + 2)/– (PROG + 2)/– for European model)Press TV (ws), then

18GBed MASTER VOL +/– ( +/– for European model)Press to adjust the volume level of all speakers at the same time.TV VOL +/– ( +/– for European model

19GBGetting StartedChecking the connection appropriate for your componentsGetting StartedInstalling SpeakersSee “1: Installing speakers” (page 20).Con

2GBTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventila

20GB1: Installing speakersThis receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer).5.1 channel speaker systemTo fully enjoy

21GBGetting StartedTips• The angle A should be the same.• When you connect a 6.1 channel speaker system, place the surround back speaker behind the se

22GBBefore connecting cords, make sure to disconnect the AC power cord (mains lead).A Monaural audio cord (not supplied)B Speaker cords (not supplied)

23GBGetting StartedNotes• When you connect all the speakers with a nominal impedance of 8 ohms or higher, set “Impedance” in the Speaker settings menu

24GB2: Connecting the monitorYou can watch the selected input image when you connect the HDMI OUT or MONITOR OUT jacks to a TV. You can operate this r

25GBGetting Started* If your TV is compatible with the Audio Return Channel (ARC) function, the TV sound will output from the speakers connected to th

26GBA HDMI cable (not supplied)We recommend that you use a Sony HDMI cable.* You can connect any components with HDMI output jacks to the HDMI IN jack

27GBGetting Started“TV+AMP” in the HDMI settings menu. If set to “AMP,” the sound is not output from the TV speaker. If you output the multi-channel s

28GBTo connect a DVD player, Blu-ray Disc PlayerA Optical digital cord (not supplied)B Coaxial digital cord (not supplied)C Audio cord (not supplied)D

29GBGetting StartedNotes• To output multi-channel digital audio, set the digital audio output setting on the DVD player, Blu-ray Disc Player. Refer to

3GB12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use cau

30GBTo connect a satellite tuner, cable boxA Optical digital cord (not supplied)B Audio cord (not supplied)C Video cord (not supplied)D Component vide

31GBGetting StartedTo connect a DVD recorder, VCRA Audio cord (not supplied)B Video cord (not supplied)DVD recorder, VCRABAudio signals Video signalsc

32GBTo connect a camcorder, video gameC Audio/video cord (not supplied)NoteBefore connecting cords, make sure to disconnect the AC power cord (mains l

33GBGetting StartedNotes on converting video signals• When video signals from a VCR, etc., are converted on this receiver and then output to your TV,

34GB4: Connecting the audio componentsThe following illustration shows how to connect a Super Audio CD player, CD player, an MD deck and DIGITAL MEDIA

35GBGetting StartedNotes on playing a Super Audio CD on a Super Audio CD player• No sound is output when playing a Super Audio CD on a Super Audio CD

36GBIf your Super Audio CD player is equipped with multi-channel output jacks, you can connect them to the MULTI CHANNEL INPUT jacks of this receiver

37GBGetting StartedThe following illustration shows how to connect a component with analog jacks, such as Super Audio CD player, CD player, MD deck, t

38GB5: Connecting the IR BlasterAttach the supplied IR Blaster to components connected to the receiver. You can control components connected to the re

39GBGetting Started6: Connecting the antennas (aerials)Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial).* The shape of the c

4GBCivic Office, your household waste disposal service or the shop where you purchased the product.Disposal of waste batteries (applicable in the Euro

40GB7: Connecting to the networkConfiguring your home network with DLNA-compliant devices.If your computer is connected to the Internet, you can conne

41GBGetting StartedThe following illustration is a configuration example of a home network with the receiver, a computer.We recommend that you use a w

42GB8: Preparing the receiver and the remoteConnect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver, then connect the AC

43GBGetting Started2 Hold down ?/1 for 10 seconds.The receiver will be rebooted. When the lamp above ?/1 flashes in green, the reboot is complete.Inse

44GB4 Press V/v repeatedly to select “Impedance,” then press .5 Press V/v repeatedly to select “4 ohms” or “8 ohms” depending on the speakers you are

45GBGetting StartedYou can switch the usage of the speaker(s) connected to the SURROUND BACK/FRONT HIGH/ZONE 2 terminals in accordance with the intend

46GB10: Calibrating the appropriate speaker settings automatically (Auto Calibration)The DCAC (Digital Cinema Auto Calibration) function allows you to

47GBGetting StartedOn setting up the active subwoofer• When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. Turn th

48GB3 Press V/v repeatedly to select “Auto Calibration,” then press .4 Press V/v repeatedly to select “Calibration Start,” then press .The screen on w

49GBGetting StartedTo save the measurement results, follow the steps in “Saving the measurement results” (page 49).If you want to check error code or

5GBThe font type (Shin Go R) installed in this receiver is provided by MORISAWA & COMPANY LTD.These names are the trademarks of MORISAWA & COM

50GBTo check error code or warning message obtained in “Performing auto calibration” (page 47), proceed with the following steps.Press V/v to select “

51GBGetting StartedTipDepending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems ev

52GB11: Configuring the network settings of the receiverThe network settings for the receiver must be set correctly to use the network functions of th

53GBGetting StartedVAIO Media plus is an application software that enables you to quickly find content on your home network, such as music, photos, an

54GB2 Insert the supplied CD-ROM into the CD-ROM drive of your computer.The installation launcher starts automatically, then a Software Setup window a

55GBGetting Started3 Press V/v repeatedly to select the menu you want, then press or b to enter the menu mode.The menu item list appears on the TV sc

56GB2 Press V/v repeatedly to select a menu you want, then press or b to enter the menu mode.The menu item list appears on the TV screen.Example: Wh

57GBPlaybackEnjoying sound/images from the component connected to the receiver1Select “ Input,” then press or b.The menu item list appears on the TV

58GBTo avoid damaging your speakersBefore you turn off the receiver, be sure to turn down the volume level.You can enter a name of up to 8 characters

59GBPlayback1 Select “ Music” or “ Video” from the menu, then press or b.2 Select “DMPORT” or a component connected to the DIGITAL MEDIA PORT adapte

6GBTable of ContentsDescription and location of parts ...8Getting StartedChecking the connection appropriate for your components ...

60GB3 Select track or content from the contents list, then press .The following content lists are just examples. They may vary depending on the compo

61GBPlaybackYou can change the operation screen using the GUI menu. The DMPORT Control mode is supported by the DIGITAL MEDIA PORT adapters like TDM-i

62GBListening to FM/AM radioYou can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM a

63GBTuning1 Press AMP.The receiver can be operated using the remote.2 Press MENU.The menu is displayed on the TV screen.3 Press V/v repeatedly to sele

64GBYou can change the AM tuning scale to either 9 kHz or 10 kHz on the receiver.1 Press ?/1 to turn off the receiver.2 While holding down TUNING MODE

65GBTuning1 Select “ FM” or “ AM” from the menu, then press or b.2 Select the preset number station you want.Preset numbers from 1 to 30 are availab

66GBSIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of

67GBTuning2 Press OPTIONS.The option menu appears.3 Select “Antenna Aiming,” then press .The Antenna Aiming screen appears.4 While checking the qualit

68GB1 Press AMP.The receiver can be operated using the remote.2 Press MENU.The menu is displayed on the TV screen.3 Press V/v repeatedly to select “ S

69GBTuning5 Repeat steps 1 to 4 to preset another channel.You can store channels from 1 to 30.1 Select “ SR” from the menu, then press or b.2 Select

7GBEnjoying the sound/images from other inputs (Input Assign) ... 99Using the sleep timer ...

70GBTo change the lock code (Lock Code)1Select any channel using Category Mode (page 67) or Direct Tuning (page 67).2 Press OPTIONS.The option menu ap

71GBTuningMessage listMessage appears in GUI menu [Display window]Explanation RemediesAntenna Error[ANTENNA ERROR]The antenna is not connected properl

72GBPlaying back with 2-channel soundYou can switch the output sound to 2-channel sound regardless of the recording formats of the software you are us

73GBEnjoying Surround SoundPlaying back with multi-channel surroundThe Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound

74GBEnjoying a surround effect for musicYou can take advantage of surround sound simply by selecting one of the receiver’s pre-programmed sound fields

75GBEnjoying Surround SoundNotes• The sound fields for music do not work in the following cases.– The multi-channel input is selected.– Dolby TrueHD,

76GBEnjoying a surround effect for moviesYou can take advantage of surround sound simply by selecting one of the receiver’s preprogrammed sound fields

77GBEnjoying Surround SoundNotes• The sound fields for movie do not work in the following cases.– The multi-channel input is selected.– Dolby TrueHD,

78GBDigital audio formats that this receiver can decode depend on digital audio input jacks for the components connected.This receiver supports the fo

79GBUsing Network FeaturesAbout the network functions of the receiver• You can enjoy content (music, photos, and videos) which have been stored on a D

8GBDescription and location of partsA ?/1 (on/standby)Press to turn the receiver on or off. When the power is on, the lamp above the button lights up

80GBEnjoying content stored on the serverA server is a device which delivers content (music, photos, and videos) to a DLNA device on a home network.Yo

81GBUsing Network Features3 Select the number you want to use to register the content from the list, then press .The content you chose will be regist

82GBTo play back a photo together with background music (BGM)You can enjoy photos with music registered in “My Library” as background music.1 Play bac

83GBUsing Network FeaturesUsing a controllerYou can do the following using a device which has a control function on the home network.– Playing back co

84GBListening to RhapsodyYou can enjoy the Rhapsody Digital Music Service by connecting your receiver to the Internet.Rhapsody is only available in th

85GBUsing Network Features4 Press OPTIONS to select “Account Information,” then press .The account type and the customer support ID appear on the TV

86GB3 Select “Artists,” “Albums,” or “Tracks” you want to search for, then press .The soft keyboard appears on the TV screen.4 Press V/v/B/b and to

87GBUsing Network Features*The number of lists displayed on the screen depends on the status of the Rhapsody Digital Music Service you are using.The p

88GBPriority is given to the station which has most recently been selected, even if other station has already been selected in one of zones.You can re

89GBUsing Network Features1 Turn on your computer and login as an administrator.2 Insert the supplied CD-ROM into the CD-ROM drive of your computer.Th

9GBG HD Digital Cinema Sound lamp (page 76)Lights up when a sound field with HD-D.C.S. is selected.H ZONE/SELECT, POWER (page 90)Press SELECT repeated

90GBWhat you can do with the Multi-zone functionYou can enjoy images and sounds from a component connected to the receiver in a zone other than the ma

91GBUsing Multi-zone Features2 Outputs sound from speakers in zone 2 using the receiver and another amplifier.A IR repeater (not supplied)B SpeakersC

92GBSetting the speakers in zone 2When the speakers in zone 2 are connected to the SURROUND BACK/FRONT HIGH/ZONE 2 terminals of the receiver (page 90)

93GBUsing Multi-zone FeaturesTipWhen you set this item to “VARIABLE,” the volume for the ZONE 2 AUDIO OUT and the ZONE 2 SPEAKERS terminals can be cha

94GB2 Press ZONE.The remote switches to zone 2 or zone 3. Change the zone setting of the remote to zone 2 or zone 3 in advance (page 93).3 Press ?/1.T

95GBUsing Other FeaturesUsing “BRAVIA” Sync features“BRAVIA” Sync is compatible with a Sony TV, Blu-ray Disc/DVD player, AV amplifier, etc., that is e

96GB5 Select “Control for HDMI,” then press or b.6 Select “ON,” then press .The Control for HDMI function of the receiver is activated.7 Press GUI M

97GBUsing Other Features• If the TV is turned on before turning on the receiver, the TV sound will not be output for a moment.When you turn the TV off

98GB3 Select “Pass Through,” then press or b.4 Select the parameter you want, then press or b.NoteThis function does not work when “Control for HDM

99GBUsing Other FeaturesWhen TV input is selected, priority is given to the Audio Return Channel (ARC) signals. If your TV is not compatible with the